Skip to Content

Avoiding Common KBRS Shower Pan Problems: Tips and Solution

The KBRS Shower pan is a nice product with great material and excellent construction, but some people have had a few problems. Read this post to learn how to avoid common shower pan issues.

Below are some common KBRS shower pan problems:

KBRS Shower Pan Problems: Difficulty Putting On The Waterproofing Membrane

KBRS shower pan problems

The waterproofing membrane is something that needs to be installed in the shower pan before you can use it. This is because it acts as a sealant between the back of your tile and your shower head, preventing water from getting through and damaging your bathroom floor. If this step is not done correctly, then you will likely have problems with leaks and flooding issues.

If your waterproofing membrane is coming off your shower pan, it’s probably because you’re not applying it correctly. Here are some tips for making sure you do it correctly:

  •       Use a clean sponge or rag to wipe down and remove any dust or dirt from your surface before applying the membrane.
  •       Make sure that both sides of your shower pan are clean, smooth, and dry before applying the waterproofing membrane. If there’s any water left in there, it can cause problems later on with adhesion and adhesion failure.
  •       Pressure wash all surfaces of the walls where you want to apply the waterproofing membrane before applying it. This will ensure that no dirt or debris is left behind that could prevent proper adhesion later on when applying other sealants (like grout)

KBRS Shower Pan Problems: Leakage

A common problem with a KBRS shower pan is leaks. This can be as simple as a small crack in the concrete, or it can be something more serious like a cracked drain or even a cracked pipe. If you notice water leaking around the shower area, it is important to take action immediately so that you do not get mold damage or other problems down the road.

You should also consider getting professional cleaning services for your KBRS shower area every few months so that it stays clean and free of mold growth and other unpleasant odors.

KBRS Shower Pan Problems: Its a bit pricey

KBRS shower pans are expensive, but they are robust, built of high-quality materials, and offer exceptional value. Most people think it’s worth the money, and most owners agree. To make a decision on a tight budget, check reviews from other consumers who have bought these products and compare them to the company’s.

New shower pans cost money for materials, labor, and installation. This might be costly if done without a contractor. The size and location of the shower pan determine its average cost. For instance, putting a tub surround in an apartment building may be cheaper than in a home or business.

KBRS Shower Pan Problems: It Will Take Longer To Install

The shower pan is a large piece of equipment and can be very heavy, especially if you install it yourself. This means that it will take longer for you to install the new shower pan than it would have if you had hired someone else to do it. You should budget at least an hour or two to get the job done, even though the instructions on installing it should be fairly easy to follow.

If you are going to install a new shower pan, it is best to install it in sections so you can work on each section at a time. This will make the job go much faster, and you won’t have to wait for the other sections to dry before installing them.

KBRS Shower Pan Problems: Poor Water Flow

KBRS shower pan problems

This problem could be caused by a clogged drain, or it could be caused by a lack of pressure in the pipes that bring water into your home. If you notice poor water flow from your shower, then it is important to contact an expert plumber who will be able to determine exactly what is causing this problem and how to fix it.

Here are some tips that can help you avoid problems with your KBRS shower pan:

Keep the shower pan clean. If your shower pan is dirty, it can easily trap water and cause mold or mildew growth. To keep it clean, use a hose to spray down the bottom of your shower once every two weeks. Be sure to rinse off any soap residue before putting your hose away.

Don’t overuse chemicals. Avoid using harsh cleaners on your KBRS shower pan, as they can damage it and cause leaks. Instead, use mild soap and warm water when cleaning the tile. For tougher stains, use a liquid cleaner made specifically for ceramic tiles.

Ensure that the shower pan is installed properly. Make sure that the mounting bolts are correctly tightened and that all parts of the mounting system are in place and secure. It have any doubts, contact a professional plumber for assistance.

If there are any holes in your shower pan, try to seal them up as soon as possible. If necessary, use a caulk gun or putty to fill in any holes that you find.

Make sure the drain is clear and free of debris. If there’s a clog in your drain pipes, call a professional plumber who will be able to fix it quickly without causing further damage to the tile surface or boiler system.


Some of the greatest shower pans are KBRS. They are waterproof and made of high-quality materials. You can use these shower pans to put them in your bathroom, cover damaged concrete, or give yourself peace of mind while getting ready in the morning.

However, they’re expensive. If you have a short bathroom remodel budget, avoid pricey shower pans and tiles. Many affordable solutions will look fantastic in your home! If your budget allows for more, you can always do with less.