Lava lamp wax separation, A lamp with colored, oily fluid flowing up and down continuously through the lamp chamber reminiscing molten lava refers to as “A lava lamp.” It is incredible how these fluids rise and sink in the section, changing their shape while breaking into globules of various sizes to provide a psychedelic effect of constantly shifting patterns.
The fascinating devices bring great ambiance to most rooms lending a relaxing glow and a retro fun look. After a while, though it still functions, you may notice that it is multifunction, and it is not flowing as it used to. It would be helpful if you understood what problem would be causing that.
Our focus on our subsequent sections will tackle the lava lamp issue- lava lamp wax separated and a bit more on the lava lamp. Read on.
Table of Contents
How to Fix a Separated Lamp Wax
For the adequate functioning of the lava lamp, wax is one of the vital elements. However, the external or the internal components can contribute to separating the lava lamp wax. But do you know how you can fix it? Worry less, for we have a solution for you.
Cause
The internal temperatures cause the wax to lose its shape separating into pieces. Wax separation is solved by aiming for a hairdryer or any heat source at the bottom of the lava lamp to fix the lava lamp wax together back to its original state.
Procedure in Details
Start by increasing the Temperature inside the lava lamp using a hairdryer. However, you can use other heat sources, including a heavy blanket on top of your light for 5-10 minutes.
But let’s focus on using a hairdryer to heat the lamp by pointing it to the bottom of your lava lamp. The wax rises and merges with anything higher in the light by doing this.
Second, Let the Lava Lamp Sit
Allow your lamp to cool for about 30 minutes to an hour to ensure the light is more fabulous than it was before. Cooling is equally vital to control your lamp from breaking down due to a one-time too much heat applied.
At this point, the wax starts to rise. Third, Run again for 5 minutes.
When wax rises, there is a difference in your solution, and it is time to rerun the Hairdryer, aiming at the bottom of the lava lamp. The heat will push the lava lamp wax up, bubbling even further because it was warm.
The process shall continue to the extent that more and more wax rises inside the lava lamp together.
Finally, carry on with step three until the wax entirely fixes
Ensure you are monitoring the progress of the resin and carry on with the prior stages as shown above, after which it should function after a few hours.
If it fails to work, increase the running time of your Hairdryer to a point where the heat will be enough to start the lava lamp wax to rise to your preference. All you need is patience.
Points to Note about Lava Lamps
To extend the lifespan of these amazing lamps, take note of these facts and recommendations:
- Only heat them with a halogen bulb and no other heat source to avoid hazards like explosions when using a stove and exposure to direct sunlight.
- Most of the lamps are in glass form, so keep them away from the reach of the children and pets.
- Store them horizontally to avoid mixing the liquids and wax inside.
- The liquids inside are non-toxic and can’t cause harm to you or your animals, so don’t panic. Ensure good ventilation because the lamp may leave a strong odor.
- Never unscrew the cap or remove the globe unnecessarily. If the need arises, you can access it through the hatch bulb from the inside.
- Avoid express use of the lamp.
- Clean the globe from time to time using a sponge and water, and unplug it two hours before cleaning
- When the lamp stops circulating, change the bulb and ensure it is 40 watt utmost.
In circumstances where the lava lamp has disbanded, lava lamp wax separation is crucial to apply heat to the underneath of the light. Use a hairdryer and project it at the lamp’s base for 5-10 minutes and let it cool off for 30 minutes. Execute the process frequently until the wax rises and binds together. It is time-consuming, but the results are exhilarating, contrary to the many corners you were planning to cut whenever you saw no positive outcomes.
Things to Consider When Acquiring a Lava Lamp
Lava lamps are trending in recent times. They are impressive and visually appealing with various benefits for an encompassing solution for your home. But do you even understand what you should consider before investing in a new lava lamp? Do you know whether it will malfunction? Look out for these three things:
Exterior Material
One of the most reported issues from users of this product is the exterior cracking or the lamp not functioning as intended. In this situation, the fluctuation of room temperature plays a role. Therefore, go for a lava lamp with a glass or aluminum body.
The materials fit the pressures of frequent use and age gracefully.
Sizing
Many lava lamps last for 2000-2500 hours, depending on their size, meaning a small light is more durable than a bigger one. Why? The amount of power required to keep it running the entire day or night depends on the lamp size.
For long-lasting lava lamps and continuous illumination in your spaces, go for a 14-inch mark.
UL Certification
Before a product is certified by UL, it must have gone through numerous tests which guarantee the quality of that specific product and its legitimacy.
UL Lava Lamps are tested and confirmed safe before entering the market.
Benefits of a Lava Lamp
- They illuminate your mood. A lava lamp adds the perfect lighting touch to any space bringing mesmerizing motions.
- The iconic lamp embellishes your living space with retro style and grace. You need to chill and relax in the beautiful colors of the lava lamp.
- Enthrall yourself and go with the flow as the molten wax moves, splits, and collides while oozing up and down the glass globe chamber.