No one likes the time-consuming packing, loading, and off-loading of the different items when moving. While most of the household properties are self-explanatory on the packaging and moving process, other sensitive items require expert consulting before you try handling them.
It’s important to consult and do the right thing instead of choosing ignorance, doing the wrong things that you’re not sure about, and later damaging the product that cost a lot of money to purchase and repair.
In addition, there are state regulations, and you should adhere to them when moving to avoid landing into trouble with the law.
Today, let’s discuss the biggest question of the current times, which is, “can you lay a stackable washer and dryer down to move it?” Typically, under no circumstances are you allowed to lay the unit of stackable washer and dryer down on its side.
You will realize that stackable washers and dryers rarely fit any vehicle when moving it. Nonetheless, you should not lay the stackable washer and dryer down to move it.
The stacked washer and dryer are the crucial items that help you save a lot of space in your laundry room. Unfortunately, it presents with the tyranny of challenges when you want to move. The two units cannot be speared easily, and the combinations are heavy and delicate.
That means that if you want to move the stackable washer and dryer, you need to do so with extreme caution. It’s typically recommended that you only try moving the stackable washer and dryer when it’s extremely necessary. Again when doing so, have a knowledgeable technician or a friend who will help you.
When moving the washing machine, it’s always recommended that you do so when it’s kept in an upright position. Please don’t make it lean on other items, make it stay upside down, nor lay it down.
Lying down the washing machine is not recommended because the practice can make the inner and the outer tubs start bumping against each other. Continued and uncontrolled bumping of inner and outer tubs leads to damage of the suspensions. That also reduces the pads’ supportive mechanism.
How to Move the Stackable Washer and Dryer
What you need;
- Appliance dolly
- Bucket
- Bungee cords
#Step One; Remove All Cloths
Remove all items from the washer or dryer. Before proceeding to the next step, double-check that no towels, clothes, or other items have been left behind in either component. If the laundry is left inside the washer dryer combo, the washing machine will be heavier, especially if it’s damp.
#Step Two; Position the Stackable Washer and Dryer Away From the Wall
Wiggling the unit from the sides can help you pull it away from the wall. Pull it away from the wall far enough to make the drain hose and the electrical outlet accessible.
#Step Three; Disconnect the Stackable Washer and Dryer Unit
Disconnect your drain hose after unplugging the stackable washer and Dryer unit from the wall. Allow the water to flow into a bucket beneath the drain hose. That will lighten the unit’s weight and lessen the likelihood of further messes. Before you begin, make sure the water has entirely drained.
#Step Four; Insert the Appliance Dolly
Insert the appliance dolly underneath the unit and tilt it slightly. You can rent the appliance dolly from the local moving companies if necessary. It’s not good to separate the washer and dryer and transfer them separately because the wiring between the two components is complicated.
Local rules necessitate that stacked washer and dryer wiring be handled by professional electricians, as indicated in installation instructions provided by manufacturers.
#Step Five; Roll the Unit Cautiously To the New Position
To move the stackable washer and dryer unit on wheels, rest against the appliance dolly and carefully tilt the dolly back. Roll your unit to the new location slowly. Use a moving truck to transport it to a new house or structure.
Since the washer and dryer can’t be separated, a car would not be adequate to move the set. Washing machine moving experts warn against laying the unit down. Therefore, if you’re moving the stackable washer and dryer to a fair distance, then you’ll need a big vehicle that can hold it upright.
#Step Six; Reconnect the Unit in Its New Position
Remove the bungee cords and place the unit on the floor far from the wall to rejoin the power, water, and drain hoses. The water system hoses should be connected first, followed by the drain, and finally, the unit should be plugged in.
When you’ve finished connecting everything, slowly walk the unit towards the wall until it’s in the right position where you need it to be. If the machine has washer and dryer slides that allow it to roll easily, this will be much easier.
Conclusion
When moving stackable washers and dryers, it’s recommended that you should keep them in an upright position. Please don’t make them lie down on the side since that might destroy the suspensions and the support mechanism.
It may also force the tubs to shift out of line, affecting the operation of your device. Front-loaders, shipping bolts, or washer locks should be put at the back of the machine, while top-loaders should slide foam or the cardboard in between the drum and the casing.
In addition, when moving the unit in an upright position, you need to protect the exterior and ensure that there are no sharp or blunt hits from an object.
Moving a stacked unit within your home isn’t difficult; but, if you’re moving it to a different area, you’ll need to check whether you can disassemble it. If the device separates, follow the manufacturer’s instructions for reassembling it, which will vary widely depending on the brand and type.
Moving the device will be more difficult if it doesn’t disassemble. However, you’ll save a lot of time and energy by not dismantling and then reassembling it afterward.