Skip to Content

How to assemble a Graco stroller after washing

Graco is the Honda of strollers: a mid-priced brand with good quality but little flair.

The stroller is popular among first-time parents who desire all of the extras. However, despite its popularity, many people are still unsure how to put it back together after washing.

As a result, in this article, we’ll guide you on how to assemble a Graco stroller after washing it.

Steps on How to Assemble a Graco Stroller after Washing

Step 1

Start by checking that you have all the parts for this model before assembling your product. A user manual might be a helpful guide at this point.

Step 2

Ensure that your stroller is completely latched open before moving to the next step.

Step 3

Mount the front seat to the support

Step 4

Assembly the trays

Step 5

Attach the rear and front canopies to the stroller.

Step 6

Turn over your stroller.

Step 7

Attach the front wheels. To do this:

  •  Start by inserting the shorter axle into the holes in the front wheel housing.
  •   Next, slide the spacers and snap the wheels onto each end of the axle.
  •  Place one cap on each wheel.
  •  Line up the wheel assembly with the front leg. Push down the assembly until it snaps into place.
  •  Repeat the same procedure for the opposite side.
  • Before moving into the next step, confirm that the wheels are securely attached by pulling on wheel assemblies.

Step 8

Attach the rear wheels. To do this:

  • Start by inserting the longer axle through the holes in the two back legs. It’s important to remember that the axle should be installed such that the brake levers face toward the stroller’s rear.
  •  Pull-on the brake assembly to see if the rear axle is securely attached.
  •   After that, take the wheels and firmly attach a hub adapter onto each.
  • Before attaching the wheels to the axle, ensure you place your stroller on top of a piece of cardboard or some other protective cover. This will help prevent any damage to the floor.
  •  Lay your stroller on its side, place a wheel on the axle end, and set a cap in place by tapping it with a hammer. Check that the wheel is secure by pulling on it. Repeat this step when fixing the wheel on the opposite side

Your stroller is now ready for use again

How to Unfold a Graco Stroller

It can be challenging to unfold a Graco stroller. This is especially true if you are unsure which latches to release or which buttons to press before trying to pull the stroller upright.

Graco produces two types of strollers; a single stroller used for one child and a double stroller used for two children. Parents will find both types of strollers helpful.

Single Stroller

To open your single stroller, follow the following easy steps:

  • Place your stroller on the ground with the handle facing straight up and the wheels touching the ground.
  • Squeeze the button on the external area of the handlebar so that the handle remains in place. Pull the handlebar all the way up till it produces a clicking sound.
  • To unfold your stroller, release the latches on either side of the stroller. The latches hold the stroller together, allowing you to carry it with one hand without worrying about its opening.
  • With one hand on the tray top and the other on the handlebar, push outwardly in opposing directions. Push until a clicking sound is heard. The stroller is ready to use when it makes a clicking sound.

Double Stroller

To open a double stroller, follow the following easy steps:

  • Place your stroller on the ground with the handle facing straight up and the wheels touching the ground.
  • Trace the storage latch between the handlebars at the top of the stroller. Release the latch.
  • On the handlebar, press the oblong button. Your stroller will open as a result of this.
  • Expect your stroller to be rigid if you’re using it for the first time. You’ll need to press down on the handle and the seat at the same time until your stroller makes a clicking sound. When you hear a clicking sound, it means your stroller is ready to use.

What are some of the Best Graco Strollers for Your Baby?

We’ve selected three excellent Graco strollers for you. Our selection is based on their comfort, weight, and long-term durability.

Graco Jetsetter Stroller

This is a budget-friendly stroller with a lot of valuable features. The fact that it is lighter than other Graco strollers is a bonus. The stroller is simple to maneuver, even with one hand.

You can rapidly open and close this stroller, as well as stow it in a small space. Many parents are attracted to it because of its low cost. However, it is also quite reliable despite its low cost and lightweight.

Graco Modes Click Connect Stroller

This is the most adaptable stroller. It can be used from the time your child is born until he or she is a toddler. The stroller is sturdy and dependable.

You may flip the child’s seat so that it faces you or the other way around with the Graco Click Connect. You may alter the stroller to suit your growing child’s needs or convert it into a carriage. Its attachable accessories make it simple for your child to sit or exit the stroller without assistance.

The Graco Click Connect stroller is compatible with any Graco car seat. Incredibly adaptive and versatile!

Graco FastAction Fold Jogging Stroller

Graco created this stroller to help you jog with your baby. So, if you’re a new mom who enjoys working out, this stroller is ideal for you. This stroller’s wheels are designed to roll smoothly for slow and quick motions.

In less than a second, the stroller can be packed. Isn’t it insanely quick? You can also open it up in the same length of time.

Final Verdict

Assembling a Graco Stroller after washing it can be a challenging task. However, we hope this article has offered you all the information you need to assemble a Graco stroller after washing it. We’ve also learned how to open various Graco Strollers, and it is safe to say that they are effortless to use.