Primo Water Dispenser Cleaning, A dirty or clogged primo water dispenser can be a real annoyance. It doesn’t take long for mineral deposits and soap residue to accrue inside your water tank. When the dial is set to dispense flavorings, this buildup can cause the water to foam up as it comes out of the spout. Fortunately, you probably have most of the supplies you need already available in your house to always keep the tank clean.
Table of Contents
How to Clean a Primo Water Dispenser: Some Safety Precautions
If you have a Primo water dispenser, you probably love how much it saves you money. But the cost of owning one can be pretty steep, and it’s essential to keep your water dispenser clean.
The good news is that cleaning a Primo water dispenser is quite simple. You need to take some steps first to ensure that you don’t damage your machine while cleaning it.
-Check for leaks
The first thing you should do before cleaning your Primo water dispenser is check for leaks. If there are any leaks or cracks, you need to fix them immediately before proceeding with washing the machine.
-Remove the Reservoir Tank
The next step is removing the reservoir tank from inside the unit by lifting it and pulling it out from its slot. It may take some force as there will be pressure on it from all sides, but it should come out fairly quickly once you start.
Empty the remaining water from inside the reservoir tank by pouring it into a sink, bathtub, or empty container such as an old milk jug. Ensure all the water has been emptied of the tank before cleaning it; otherwise, this could cause more damage.
When to Clean your Water Dispenser
Water dispensers are a great way to ensure the safety and quality of your water. They filter the water from your tap, which can remove impurities, bacteria, viruses, and even heavy metals.
However, not all water dispensers are created equal. Some are more effective than others at filtering out these contaminants. In addition to this, some filters require more frequent cleaning than others.
Some important tips:
- If you use your dispenser frequently or multiple times a day, it’s essential to check the filter regularly for sediment buildup and discoloration. If you see any signs of this, it’s time to replace the filter every six months.
- If you don’t use your dispenser often but still want to ensure it is working correctly, consider changing the filter. Once every six months to ensure there aren’t any issues with internal parts or leaks in the system that could impact your health.
What you’ll need:
Cleaning a Primo Water Dispenser is simple and can be done weekly to keep your water dispenser in great shape.
What you’ll need:
- A bottle brush or even a baby bottle brush
- White vinegar or lemon juice (optional)
- A sponge or rag
How to clean your water dispenser
Your Primo Water dispenser is built to last and perform for years. However, even the most high-tech pieces of equipment need a little help from time to time. You can ensure your Primo Water dispenser stays tip-top by performing regular maintenance and cleaning tasks.
Here’s how:
- Turn off the control panel and press down on the red button to release water pressure.
- Clean out the basin by removing all of the parts and washing them with soap and warm water. Check for any rust marks or stains on them, as well as inside of the basin itself. If there are any stains on these items, use a cleaning solution made specifically for stainless steel. Cleaning out any dust that may have accumulated inside the basin during its regular use is also essential.
- Wipe down all surfaces with a damp rag to ensure no dirt remains on them. Use a dry cloth to remove excess moisture from each surface after cleaning with soap or vinegar, another cleaning product if needed.
- Rinse out the inside of the reservoir with warm water and mild detergent. Use a soft-bristled brush for extra cleaning power if needed.
- Run several gallons of cold tap water through the dispenser until it’s empty again (or until all of your home’s plumbing has been flushed).
- Reassemble all parts back into place when finished cleaning them individually if they were taken apart previously while doing this process
How to Prevent Having a Dirty Water Filtration System
You can prevent having a dirty water filtration system by cleaning it regularly. You should clean your system once every three months or after 50 liters of filtered water, whichever comes first.
Clean your system by using a sanitizing solution or vinegar. The sanitizer you use doesn’t matter as long as it’s non-toxic to humans and animals. Vinegar is the most common ingredient in homemade water filter cleaning solutions because it’s natural, inexpensive, and effective.
If you want to make your cleaning solution, mix one-part vinegar with ten parts of hot water. Then pour this mixture into the water tank of your Primo Water Dispenser and let it sit for about 15 minutes before rinsing out with fresh water.
Cleaning Your Water Filter
Before cleaning your filter system, ensure it’s unplugged from its electrical outlet and turned off at the valve at the bottom of the tank. Always use caution when handling electrical appliances because they can be dangerous if not handled correctly or if they are damaged in any way. If you don’t know how to turn off a device safely, ask someone who knows how or call a professional who can help you.
Final Thoughts
Indeed, having a clean water dispenser is essential for your family’s health. Even if you don’t have allergies, sanitary-wise, it’s good always to keep your water cleaner. However, keeping your water cooler clean isn’t easy.
If you want to save money on water at home, there are two basic ways to make this happen: Use less and drink better water. Now we have shown you how to clean a primo water dispenser so you can decrease how much water your family uses without sacrificing their health.