Frigidaire Ice Maker Water Sensor Issues that keeps telling you to add water even when your reservoir is full can drive you crazy. Mostly, this appliance is a solution during the excruciating summer season because you’re sure you can offer your family, guests, and friends a chilly cold drink.
Unfortunately, just like any other electric device, it can malfunction due to debris or some buildup leading to a misread. Scarce minerals in the water could also trigger the added water light to stay on. In this piece, we give you a step-by-step guideline on how you can fix the problem. Let’s get right in.
Table of Contents
Why Does The Frigidaire Keep Asking To Add Water?
The lights stay on for several reasons, such as a faulty water sensor, layers of waste, dirt buildup etc., on the sensor, which causes misreading. Fortunately, you can resolve these issues.
Faulty Water Sensor
The water sensor’s work is to monitor the water levels in the machine. Typically, the water sensor activates a light when the water inaccurately fills the tank. Other times, the water might be complete, but the lights still stay on due to a sensor malfunction. The cause may be due to waste buildup and debris on the sensor resulting in inaccurate readings.
To troubleshoot the issue, first, pull your ice maker reservoir. Second, dampen a towel, clean your water sensor, and check if the light water sensor is on at the freezer’s front door. Frigidaire Ice Maker Water Sensor Issues it is on, check back on it after two hours to ensure everything is working correctly. If the problem persists, there will be other reasons.
Few Minerals in the Water/ Pure Water
Some installed sensors can read the purity level in the water, despite water containing some minerals getting removed through filters. Too pure water in the ice maker reservoir makes it difficult for the sensor to recognize its presence inside the pool.
To resolve the pure water issue, add salt to the water while ensuring it retains its natural taste. The purpose of adding salt is for the sensor to read it. However, for a long-term solution, you need to add a pH balancing filter to your system for an automated addition of minerals.
A Bad Circuit
Another reason for your Frigidaire ice maker constantly alerting you to add more water is a faulty circuit. A motherboard problem needs to be fixed by a professional to establish the root cause and whether it is fixable.
Water Line Clogging
Due to an increased clog in the pump or pipeline in the machine, water doesn’t easily pass through the tank to form ice cubes. As a result, the light keeps on.
To fix the issue, remove all clogs and debris in the pipeline to clear the pipes for an easy flow to fill the tank. Therefore, the sensor will read when the tank is full and switch off lights from the fridge’s front door.
Frozen Waterline of Ice Maker
Besides debris, ice can also block the water supply as the ice maker container has low temperatures. Therefore, if the water line gets cold and freezes, it prevents water flow. The outcome is water not reaching the tank; hence lights will stay on.
To hack this issue, unplug the Frigidaire for 5 to 6 hours for the ice to melt from the pipes. Alternatively, you can flush the lines with warm water until the ice melts, then test run your appliance to see if water will begin to flow.
How to Unclog the Ice Maker Water Line?
We’ve already discussed water line clogging as one of the causes your ice maker keeps telling you to add water to your machine. Fix the clog issue quickly by these simple steps:
First, cut the water flow into the refrigerator hose to avoid water splashing throughout your kitchen.
Use a cloth hanger or something related to unclog the line. To avoid tearing the hose, tape a little piece of soft cloth or something similar.
Finally, push out the clog, followed by water, through your hose to ensure it is clear before reattaching.
10 Simple Steps to Reset a Frigidaire Ice Maker
Re-starting your ice maker is one way you get to fix your water light stay on disappearing by following these pretty easy steps:
- Start by unplugging the appliance from the power source
- Empty the water tank
- Open the lid to remove ice from the ice basket
- Using a soft clean rag, wipe the metal tubes.
- Close the lid
- Reconnect the ice maker back to the power source
- Turn on the machine
- Press and hold the power button for about 10 to 12 seconds as it acts as the reset button in a Frigidaire ice maker model.
- Give it the rest of between 2 and 3 hours.
- Finally, refill the reason on the machine to check if the functions
How to Maintain an Ice Maker
This appliance is very significant; however, it is prone to malfunction. Hence it is best to ensure yours lasts longer. The tips below will be of much help:
Change the Filters
The water filters sieve debris and minerals to create clean, tasty ice. It is then essential to ensure you clean them often and replace them every six months.
Keep Away From Heat Sources
Too much exposure to heat sources like grills, toaster ovens, stoves, and even clothes dryers, including sunlight, should be avoided.
Regular Check the Supply Lines
Check for any cracks or tears to prevent your ice from running and curb more significant problems that can be costly to repair.
Change your supply lines when they are damaged.
Is your Frigidaire countertop ice maker a suitable appliance, especially during summer? Yes, but you may notice the water sense lights stay on. Regularly maintaining it well is essential, and getting rid of dirt from the water sensor and ice from the pipelines are some of the ways you can troubleshoot the issues.
If the solutions shared don’t work, it is prime time to contact a professional for help, or if it is still under warranty, you can replace your ice maker.