Vikrell is one brand among many in the space of poly composite bathrooms. Vikrell’s underlying material is mainly polyresin and fiberglass. As a result, many users are unsure what the best cleaning solutions are best for the material. This article focuses on how to clean vikrell.
Can you use magic eraser on vikrell?
A magic eraser is typically a “sponge” advertised as a catch-all cleaning tool. It is pretty simple to use and works on virtually any stains and scuffs with no added detergents or cleaning solutions. But can you use it on vikrell?
Unfortunately, it’s not recommended to use abrasive cleaning tools like magic erasers or Scotch Brite pads on vikrell. These, along with harsh chemicals, should be avoided to prevent damaging the material.
What cleaners can be used on vikrell?
Most experts recommend using mild cleaners for weekly cleaning of your vikrell bathtub or shower. Use a soft, dampened sponge to clean the walls and avoid abrasive materials like brushes or scouring pads. You should also avoid acidic cleaners as they may cause discoloring or surface dullness.
Does Vikrell stain?
Tubs and sinks made from Vikrell deliver exceptional resistance to stains and scratches. However, stains might still build up if you don’t clean the material regularly.
How do you get stains out of vikrell tubs?
Of course, a dampened sponge and mild cleanser will not eliminate tough stains on your vikrell tub. For this, you’ll need to go full DIY.
Mix 2 teaspoons of a low-foaming powder, automatic dishwasher detergent, and around 20 ounces of bleach (5% to 6% hypochlorite) with the water. Next, run the whirlpool for around 10 minutes and then drain the water. Finally, rinse the bath surfaces with fresh water.
Does vikrell scratch?
Vikrell material mostly retains its smooth surface. It rarely chips, cracks or peels. It is also effortless to clean.
What is the best way to clean vikrell?
Vikrell’s non-porous surface is relatively easy to clean. That said, just like other bathtub materials, you need to clean vikrell regularly.
The best way to clean the tub surface is just by wiping it after every use with a clean rug. You should also clean it using mild cleaners and a damp rug now and then to eliminate dirt and soap scum.
How often should I clean vikrell shower jets?
You should clean the tub jets at least once a month. Just fill the tub with hot water until all the jet openings are submerged. Add half a cup of homestead bleach and 2 tablespoons of dishwasher detergent. Run the jets for about 10 minutes and then drain the tub.
Which is easier to clean: vikrell or acrylic?
Vikrell and acrylic are pretty great tub materials. But on the one hand, vikrell is lighter and does not withstand impacts as well. On the other hand, acrylic is much more sensitive to chemicals, even simple shampoos, and soaps, making it slightly more challenging to clean.
Benefits of Vikrell tubs
How would you like to spend less time cleaning your house and more time relaxing in it? Vikrell tubs give you this option by being durable and extremely easy to clean. Here are some of the most impressive benefits of vikrell tubs.
l Vikrell bathtubs are also more lightweight than those made of cast iron or other popular materials. Since they aren’t as heavy, they are easier to move around and install in a new home.
l They are also pretty tough products and can easily last 15 years without issues. In fact, vikrell offers a 10-year warranty on its domestic products, including bathtubs.
l Since Vikrell is so moldable during the manufacturing process, it can be made into just the right pieces. These pieces fit together perfectly, making them easier to transport and reassemble yourself. Additionally, because of the tight fit, the entire assembly can remain watertight without you needing to caulk any seams.
l Vikrell bathtubs are also impressively resistant to stains. A bathtub endures a lot of wear and tear and is often exposed to horrendous stains. However, Vikrell is one of the materials that do a great job not holding on to these stains.
Disadvantages of VIkrell tubs
Although Vikrell tubs are easy to install and maintain, they also have a few shortcomings. Mostly, these problems occur when the users don’t install the product correctly. Although these pieces are pretty easy to install, they require a little understanding of the correct placement and foundation.
When installing a vikrell bathtub, you need to have a mound or layer of mortar or cement beneath it. This foundation is quite important, regardless of what the manufacturer says. It supports the bathtub and prevents it from popping, warping, breaking, or flexing.
Without a proper cement or mortar base, the bathtub is vulnerable. Vikrell is made of fiberglass, which is a strong material but is still a glass-adjacent. This means that it can be brittle in some conditions.
Can you repair Vikrell material cracks?
If a crack occurs on your Vikrell, your first step should be to consult your warranty. Since most Vikrell products have a 10-year warranty, it’s likely to be still valid.
If the unit is still under warranty, the company will probably give you a new one. If not, you’ll have to choose between repairing the crack and replacing the unit.
If the crack is minimal, you can get away with just caulking over it. Use clear, waterproof silicone caulk to seal over the crack, ensuring you cover every bit of it.
In case the crack is wider than a hairline but still not too big, you can get a repair kit to fix it. You obtain these from the manufacturer or get a generic model online or from your local hardware store.
Of course, if the crack is too broad and deep, you’ll need to think about replacing the unit.
Vikrell is an excellent material for bathtubs and showers. It is easy to assemble, clean, and maintain. It is also very durable and comes with extended warranties.