Cleaning Guide for Honeywell Tower Fans, Sitting all day in an office or home without air conditioning facilities can be draining. Hot afternoons are the worst environments to work in.
We all want to have air conditioners but we can only install them in our homes, at the office, that’s your boss’s jurisdiction. If the office does not have proper air conditioning facilities, you might have to contend with opening the windows when it gets hot.
Is there really no way out? Well, there are is-fans. Fans like the Honeywell tower fan work by blowing air around like some sought of wind and in this way lower the room’s temperature.
As the fan’s blades are most of the time exposed to dust and other particles floating in the air, it is no surprise that the manufacturer recommends cleaning after every 3 or 4 weeks-this is for daily users, if you rarely use it, cleaning it every 6 or 8 weeks is alright.
Cleaning Guide for Honeywell Tower Fans a daily user, you might want to clean the surface and blade every day unless you want the fan blowing dusty air on you.
Table of Contents
When Should You Clean The Honeywell Tower Fan?
Generally, when fans get dirty, they exhibit symptoms like noise making, weak rotations, or even no rotation at all.
Cleaning Guide for Honeywell Tower Fans fan shows these signs without proof of damage then you might be looking at a fan with dusty blades.
How Should You Clean Your Honeywell Tower Fan?
The first step should be to check if the fan supports opening up. There are fans that you can open up when cleaning to get to the dust’s core while there are others that only support exterior cleaning.
If your Honeywell tower fan is not built with the opening up feature, do not attempt to open it up. If you do, you risk voiding your warranty.
The tools
- Screwdrivers, you can go for the flat head but others could play a role too.
- Compressed air, one can be enough
- A soft but thick cloth to rub off the dust
- A vacuum cleaner-go for one with a vacuum brush
- A brush-an ordinary one will do but if you can, get the soft-bristled type.
- Cleaning agent-don’t overthink it, even a household cleaner will do the trick
- A pipe cleaner-it should set back around $7
Unplug The Fan
Corny as it may sound, most people forget to unplug their fans from the socket before cleaning. This is more of a safety measure than a way to hasten the process.
Disconnecting the fan from power disables the fans. This way, they won’t suddenly start running as you clean-this can be dangerous.
Turning the blades off also stops dust from getting further deeper into the fan’s motor.
Vacuum Clean It
Using a vacuum cleaner and vacuum brush, dust the blades and motor housing to take down any dust on the grille.
If your vacuum cleaner does not have a brush attachment, you can always use a soft-bristled brush. If the job seems light, an ordinary brush or micro-fiber cloth could work.
Take down dust particles on the fan’s housing. This is meant to free the fan of easily removable dust or dirt. You can start with the air entry vents, this will ensure the free flow of air into the fan.
If the dust proves too thick, especially by the grilles, you can always use a stronger tool like a pipe cleaner.
Employ The Compressed Air
This is where the compressed air mentioned in the tools section comes in. Blow the compressed air through your Honeywell tower fan to take down dust from the outer vent. Concentrate the pressure on the most affected areas.
You can get compressed air from home tools stores around your place. Some office supplies stores also stock them; you can try your luck.
Plug It Back
After satisfactory cleaning, plug the fan back into the socket. This will blow off any dust that might have missed your eye.
Ensure to take out any noticeable material or debris from near the blades before turning it ON. If the fan runs with these objects near the blades, you risk having them blow around-they could easily hit your face or eyes.
The fan should be left to run for at least 4 minutes during which you will run the vacuum cleaner around to clean off objects flying off the blades. After this period, unplug it and proceed with cleaning.
Use The Dry Fabric
Get a dry fabric and dampen it with a cleaning agent. You don’t need an expensive cleaning option, ordinary household cleaning agents should do.
With the mention of liquids, it is apparent that you will need to ensure the fan is unplugged.
Run the cloth over the fan’s exterior, rubbing off any dust on the plastic. You can also sweep the floor to collect the objects falling from the blades.
After all the dust, debris and dirt are off your Honeywell tower fan, you can plug it back and test for improvement.
Cleaning The Fan’s Interior
The details above are concentrated on cleaning the fan’s outer parts without necessarily opening up the interior.
What if you could take the fan apart to access other deeper areas? How would you do it? We’ll tell you. You start by taking the fan apart of course. You can learn that in the user’s manual. Using the flat head screwdriver, take the fan grille out, caution is recommended to avoid damaging the fan’s crucial parts.
To reach the blades, you will have to remove the two plastic covers housing them. Rub off the dust from the blades using a fabric cloth-be gentle as the blades are brittle. Remove any residue debris from the fan’s interior using a vacuum cleaner. Dust the front grille as well, if the dirt persists, you can use water and a cleaning agent.
Bottom Line
The Honeywell tower fan is among the most widely used fans in the market. It owes its popularity to its superior build and smart features.
Like other fans, the Honeywell tower needs regular cleaning to maintain optimum performance and maybe guarantee longevity.
The article above is a step-by-step guide on how to best clean your Honeywell tower fan without damaging its various parts.
