Skip to Content

How To Fix Flameless Candle

A flameless candle is a type of candle that can be used without being connected or attached to any fuel source. That means they are a lot safer. Flameless candles don’t require lighters or matches as they include an inbuilt system for lighting them up.

As a result, these are suitable options for fishers and campers at night, or when you reach home at night and you don’t have much time to light up a candle with traditional methods.

Such moments often call for flameless candles. In this article, we will discuss how to fix flameless candles to patch things up easily.

Steps on How To Fix Flameless Candle

The first thing is to unplug the unit from the power outlet. Then remove its plate in front of the battery compartment.

Proceed and unscrew the screws on tape. To do this, carefully insert the knife into holes and turn it in a clockwise direction to remove the battery.

Get 2 cm length of black and red wire and connect them. Fix their ends into metal housing at the bottom side of the candle along with green wire without soldering it to the place holder. The wires should be attached with a metal plate while inserting them into the housing.

Now that you have detached a bulb in front of the battery compartment, put your circuit board (which you have fixed) above it, along with a metal plate. Then connect one end of another wire (green) with green wire or copper tape present underneath the brass screw.

Note that you will have to strip the remaining black and red wires of length 2-3 cm and then make conduction with green wire.

Attach their ends to batteries along with a metal plate (which you have fixed) at the bottom of the candle. Then wrap it all around the candle using wrap tape or simply encapsulating it.

The next thing is to fix two LEDs on the left side of the battery compartment, where there’s a bulb. This should give you light when power is on. Still, this step is totally optional because the LED doesn’t glow much. Some people choose to skip it.

Once you’re done with the above steps, place your flameless candle into its cover and after that, put back all the screws of the plate to fix it properly.

The last step is to check whether LEDs are glowing or not when you plug your device into the main power supply. This is basically to examine whether there is light or not while switching on the device.

You might have to unplug it from the place and re-plug it again for proper working. If there are lights, then congratulations, you’ve done a great job. If there’s no light, don’t worry. Simply repeat the above-mentioned steps once again.

Take Caution While Fixing Flameless Candles

If you’re trying to fix a window candle, go for a window with ample sunlight to make sure it remains functional throughout the day. It could even look much like a real candle if used in some colored windows.

Always be sure to turn off the lights before removing the batteries from your previous flameless candles and after inserting new ones onto the brand-new ones.

This will help to avoid draining all of the power unknowingly, and in turn, keep them working for years to come. Besides, flameless LED candles are both safe and energy-efficient given that they do not require any replacement components or bulbs.

Avoid taking these types of items near water or high moisture areas such as showers or bathrooms. This is because they often emit water vapor which could cause the inner electronic elements to short circuit.

Also, don’t bury them in snow as these kinds of candles are not intended for use in freezing environments. If your candle starts to blink or stops working, it is probably because of low batteries.

When using flameless candles, be sure to keep them away from sources of flame such as lighters, lit cigarettes, and matches. Before putting a flameless flower arrangement in an air container, check that they aren’t turned on because you might accidentally damage your creations.

It is also important to make sure that nobody knocks over the candle display or puts items within it such as vases or other decorations. This could also damage your candles and battery packs.

Can You Paint Flameless Candles?

Of course, yes. You can paint your flameless wax candles. If you want to start painting your candle, you will need to first locate a vessel that will be the base of the candle. The best dish for this should have a long neck and a wide bottom so it can accommodate more liquid wax.

After getting the right container, proceed and pour the melted wax into the container while using a spoon or white to stir up any air bubbles that may be present.

The next thing is to add colorants such as food coloring or colored oils like turmeric or red oil. These are available online.

Now at this phase, you can paint your desired design with the melted wax, starting at the top of the container and working down towards the bottom until all your design is covered.

After you have painted everything, wait for about 5 minutes before pouring out excess liquid wax into another container and melting it again to make sure no air bubbles are left before pouring into molds and finishing off as usual.

Conclusion

Flameless candles can be an excellent way to add some flattering effects of light and warmth, largely without risking a fire. These candles look and feel like real ones as they can flicker like real flames.

The best part is that flameless candles are available in different color temperatures from which you can choose your desired choice. What’s better, if you want more lumens, you can consider choosing LED solar flush mount lights instead.