Fix Sagging Futons used to be a favorite option for college dorms, back when they were just a simple frame and mattress. Most futons today have a variety of materials and covers to match any palette. They fit practically any space and are quite adaptable. However, futons all sag in the middle after a time.
Table of Contents
What Causes a Futon to Sink in the Middle?
Well, a folding futon might seem as simple as the mattress being worn thin, but the issue is usually more complex than that. Here are some of the reasons why your futon could be folding in the middle:
The Frame
Futons were once made of metals and sometimes wood- even though wooden futon frames were generally much pricier than the metal ones. Depending on the material employed in constructing the frame, this can cause the sagging center of the futon. These materials can become bent over time and cause your futon to sink in its middle.
Metal Frames
One thing that makes futons as affordable as they are is that the frame is typically made of low-cost metals. This is important because it makes them more accessible, easy to assemble, and even move when the need arises. Also, futons made with metal frames are easy to keep clean.
On the flip side, the metal used isn’t the strongest and might bend after extensive use. If the metal frame is aging, it could be making the mattress fold and sink in the center.
Wooden Frames
Over time, wooden frames have evolved. The most frequent woods for futon frames are pine, oak, mahogany, beech, and maple. Wooden futons are attractive and durable with proper care.
However, without adequate care or a weak frame, the mattress may sag in the middle. Water damage can warp and distort wooden futons, causing the center to sink.
Mattresses and Cushions
Futons provide excellent comfort, which makes them one of the most prized pieces among homeowners, thanks to the mattress. However, some mattresses or cushions can’t withstand constant use, which can be the guilty party for sagging.
When the futon is up, the mattress lies in its bed form and conforms to the frame in the seated position. Since these mattresses are separate from the frame, they tend to slide around quite a bit, leaving them vulnerable to a bit more wear and tear.
Repeated use may cause futon mattress drooping.Most futon cushions are linked to the frame. Sag during long sitting, but cushioning sliding won’t damage them.
Most importantly, futon cushions are composed of high-quality fabrics that prevent them from sagging or folding as quickly as mattresses without frames.
How to fix a Folding Futon?
The good news is a futon that folds in the middle can be revived. The idea of fixing a sagging futon might seem like a big chore, but it doesn’t have to be.
There are several things you can do to help your folding futon, including supporting it with a pillow or even bolstering it with additional padding inside the pad. Here is how to keep futon from folding in the middle:
Check Your Futon
Fix Sagging Futons slight sag, the best thing is to intervene before it gets to be a major issue. Below are the various remedies that you can apply. They are easy and you can fix your futon using things that you most likely already have.
Provide Support
Fix Sagging Futons has a mattress that’s separate from the frame, consider using a pillow under the spot that’s starting to fold. A firm bed pillow can provide the much-needed support to fix a sagging futon for a while.
Well, this is just a band-aid for the time being, but can be a longer-lasting solution if you’re willing to change the pillow for a fresh one, whenever the pillow starts to wear. Although the pillow method usually works pretty well, you might want to add a bonus layer in the form for extra support.
Air it Out
Allowing the mattress fibers to regain their strength and to bounce back from always being sat on is important, especially when it comes to the longevity of the cushions. This might not help with major folding, but it can work pretty well with minor sinking issues.
Just unzip the cover and give the mattress a chance to lay flat for a few hours, or overnight if at all possible. Better yet, let your futon mattress be free and lie flat all weekend when you go out of town.
Flip and Rotate
Fix When sagging futons are repeatedly sat on, they’re pushed down. The mattress’ fibers aren’t strong enough to handle the weight.
Note that futon mattresses are made of softer materials, usually cotton blends, to make them more comfortable. That means these materials can only spring back so much.
They will flatten and sink the mattress after they are worn down and have no spring remaining. Flipping and rotating the mattress may cure this. Changing up the position of the mattress will allow the whole thing to wear evenly, so not one particular area or spot takes all the brunt of the sitting. What’s better, this method also prevents too much fading or wear and tear on the actual mattress pad, which is great as a futon mattress can get really expensive.
Wrap Slats and Bars
If the problem stems from the frame, focusing just on the mattress won’t actually change anything. If the futon is folding, and it seems that the metal frame is warped or distorted under the seat, then wrapping them can do the trick.
Using duct tape to tape the bars can be a really simple and inexpensive fix if you’re not concerned with how the underside of your futon looks. This will provide enough support and assist in preventing further sagging.