Skip to Content

Troubleshooting Glacier Bay Toilet Issues: DIY Fixes

The Glacier Bay toilet model is a budget-friendly toilet as it doesn’t include a lot of extras, and its issues are similar to those experienced with other bathrooms. It has a flush valve, either a traditional single-flush or double-flush type.

Why is the Glacier Bay Toilet Running Continuously?

Glacier Bay toilet issues

Continuous running of the toilet is when your toilet tank constantly fills up even when it is complete. Whether your tank is single flush or dual flush, this problem would result from excess water levels, flapper or seal issues, debris, or a broken zip tie. Let’s look at each in detail. 

Excess Water Level

Your toilet water levels are more crucial than you can imagine. When the water is too much in the bowl, your toilet keeps running, which leads to wastage of water. The water level is regulated by a float that turns the water system on and off depending on the water level in the tank (and in the bowl).

You can troubleshoot this problem by checking the water level. If the water empties into the overflow tube, you can reduce the water levels by regulating the float. Glacier Bay toilet consists of a cup-style float which connects to the fill valve by a notched plastic rod.

Next, unhook the rod from the valve and lengthen it by one or two notches to enable the float to switch off the valve sooner. Proper rod adjustment should make the water level an inch beneath the overflow tube.

Lastly, turn on the water supply.

Glacier Bay Toilet Keeps Running: 5 Reasons Why

Flapper or Seal Issues

Over time, the flapper’s misaligned, or it can become brittle. The problem affects single-flush toilets. To resolve this issue, cut off the water supply and flush the toilet to empty the water. Remove the remaining water with a sponge or towel.

Next, remove the canister from the flush valve to access the seal. Check for any cracks, and you will have to replace them if there are cracks in the seal. If there are no cracks, check out if you can realign the rubber to fit well in place.


Due to an unclean water supply, dust or dirt may enter the toilet, making the fill valve malfunction. To check it, shut off the water supply and remove the lid from the fill valve to eliminate debris.

In addition, scrape the valve using a small brush, then recap it back and check whether the problem has been resolved.

Broken Zip Tie

The fill valve in the dual system has a zip tie to keep its base in place. A weak fill valve makes the toilet run. Sometimes, the zip tie wears out or breaks before the rest of the device does. 

Therefore, replace a broken zip with a new one, or place two zip ties on the fill valve to secure the base and prevent leakage.

Poor Toilet Flushing

Lack of proper flushing may signify debris accumulation or a broken blush, causing the water inside the tank to get overfilled, resulting in a run gutter.

Worn Out Valve

Many harmful cleaning substances cause wear and tear on the valve. Also, if your pipe has lasted for over 6years, you need to replace it.

How Do You Adjust The Toilet Fill Valve?

The Fill valve (ballcock) works to control the water flow that refills the tank each time you flush the toilet. A proper adjustment to the fill valve ensures a perfect flush.

The fill valve has a float that moves with the water level in the toilet tank, opening to refill the tank with water after flushing and closing the water when the tank is full.

When this valve is set too high, it allows water to continue filling the tank as there is no communication to shut them up.

However, it is essential to understand that the specific way to adjust the fill valve rotates around the type of valve your toilet uses.

What Other Problems You May Encounter With Glacier Bay Toilets?

Fill the Valve Cycles On And Off

Self-restarting the toilet is a sign of a leaking flush valve. Although you can confirm this, to be sure, place some food color in the tank water; let it settle for a few hours without flushing. If there is a leak, the bowl water takes on a color.

Water on the Floor

Glacier Bay toilets connect to the water supply using a flexible hose. You may tighten it using your hand, the reason why it might be dripping. Fasten the hose using adjustable pliers and fix the dripping issue.

Please clean up the water and check whether it has been resolved.

A pool of water around your toilet base signifies a weak wax ring. To resolve this, you must pull the toilet up and replace the wax ring to avoid leakage.

How to Adjust the Water Levels in Glacier Bay Toilets?

Glacier Bay toilet issues

Turning the rod from the float cup counterclockwise would be best to reduce the float and the water line. Adjust the float cup by turning the rod clockwise if the water is not up to the fill level.

How to Adjust the Float

The float’s work is to control the water levels in the tank, and if you want, the water must be an inch lower and beneath the top of the overflowing tube. If you have a fluid master valve, turn the screw on the connecting rod.

Adjust your float by rotating it until the bend in the arm faces up or down as required. Additionally, you can adjust the float length arm by screwing or unscrewing the ball.

Glacier Bay toilets are affordable, but like the other toilets, they also have their share of problems. But the good news is that you can fix them yourself. Therefore, it is best to examine your bathroom to establish what causes the constant running.

We have comprehensively covered how you can troubleshoot any issue with Glacier Bay toilets with the hacks shared above.