Purchasing new furniture for your home, as well as moving depending on the circumstances, can be a joyful and exciting experience. However, what if your sofa is 40 inches wide and your door is 32 inches wide? Is the couch going to fit through that small opening? Will this be a problem if you don’t have another method to get the couch in or out, such as a sliding glass door?
A 40-inch sofa will fit through a 32-inch door, but it will need to be wrapped. This is to prevent the sofa fabric from tearing as it is being pushed through the doorway.
Remember that it will be a tight fit, but the sofa should be able to squeeze through. To ensure that the couch passes through the door, it is advisable to bring it in at an angle. Once both sides are in place, you may begin pushing the sofa in all the way. The procedure will take some time, but with proper wrapping, you should be fine.
Why Doesn’t Your Sofa Fit Through The Door?
If your freshly purchased sofa does not fit through the door, the width of your entry is likely insufficient to accommodate the furniture. If your door is more expansive than 32 inches, you may not be appropriately rotating the couch to allow it to pass through. Furthermore, the egress around your entrance may not be sufficient for the furniture.
How Can You Pass Your Sofa Through the Door?
If your sofa is wider than your door, you may need to use some unique tactics to get it through. Let’s have a look at some of the ways of getting furniture through a narrow doorway.
Measure Everything Accurately
This is the first stage in determining whether or not your sofa can readily pass through the doorway. Take precise measurements of the couch. If it has legs, make sure to account for their length when calculating width.
Then, for both length and width, measure your doorway. Additionally, measure the egress on both sides of the door, as the hall through which you must move the sofa must be large enough for the couch to pass through.
With the correct measurements, you’ll be able to have a better sense of how to get the furniture through the door with ease. If the sofa’s legs are excessively long, you can examine if there is a way to remove them.
Use Padding on the Sides
Trying to get your new sofa through a narrow door is a tight squeeze that could result in furniture abrasion. If you don’t want to risk it, use pads to make it simpler for the couch to slide through the entrance. Vertical metallic, wooden, or plastic planks with soft padding on one side are examples of such pads. Place the soft side of these padded planks against the couch. After that, push the sofa through the door to allow it to slide through.
A furniture dolly can also be used beneath the sofa to make the process as smooth as possible.
Dismantle the Sofa
If your new sofa is too large to fit through your tight doorway, select to dismantle it if your furniture allows it. Some sofas, for example, can have their legs removed to make them narrower. In some sofas, the armrest and headrest can also be removed. Also, sometimes unless you plan on putting it in a garage for a man cave, an entire piece will not fit through any doorway. As a result, you’ll need to take it apart to fit it into your house.
Move the Sofa in a Vertical Position
If your door is too narrow for your sofa to fit through comfortably, try putting it in a vertical position. Make sure it’s on a sliding surface, such as a cardboard piece, so the fabric doesn’t get scratched when you’re moving it. While the furniture is standing upright, see which side of the sofa can easily fit through the opening. While in this position, enlist the assistance of two or three extra persons to assist you in moving the couch.
Move the Couch in a Curved Position
This method uses physics to assist you in moving furniture through the doorway efficiently. It works well with sofas, particularly those with legs. Place your new sofa on its back with the legs pointing forward. Through the door, pass the section of the couch with the front two legs. The furniture is then curved to allow the front legs to move forward. With the sofa in this position, you’ll have plenty of room to push the rest of the furniture through the entrance with the back legs. After that, return the sofa to its upright position and set it anywhere you desire.
Move the Sofa in an Angled Position
An inclined position is another option for moving your sofa. When positioned at an inclined angle, some sofas may have a reduced width. You’ll need some extra aid to balance the unit on two legs in this position. When adopting this strategy, keep in mind that the sofa’s body will exert much pressure on your legs while you’re working.
Get a Flat Pack Instead
If you have a tight entryway and yet need a sofa, go for a flat-pack option. Flat packs fit easily through tiny doors and can be constructed inside the room where the furniture is required. These are extremely useful if you have tight egresses, hallways, or corners surrounding the entrance.
Remove Baseboard of the Door to Create More Space
A detachable baseboard surrounds some doors. The width of the doorway increases when these boards are removed. This will give you enough room to get the couch through the opening. Though the procedure, on the other hand, may be tricky and time-consuming, it will solve your problem.
Hire a Professional
If none of the above strategies has shown to be effective, it may be time to seek professional assistance. Many of these experts have decades of expertise, the necessary tools, and the ability to transport furniture from one location to another through even the most challenging openings. They will be able to tell you the best strategy for getting the sofa through your selected door by looking at the area.